Maintenance And Care; Cleaning - HBS Visar 650 Operating Manual

16

Maintenance and Care

Electric shock hazard
‹ Always switch off the stud welding unit before starting maintenance and
care work.
‹ Pull out the mains plug.
Danger from insufficiently qualified operating personnel
‹ Carry out only the work described here on your stud welding unit.
‹ Repairs may only be carried out by appropriately qualified personnel.
‹ Inform your dealer or your maintenance department.
16.1

Cleaning

‹ Clean the surface of the stud welding unit with a slightly damp cloth, when
necessary.
‹ Add a little household detergent to the cleaning water.
‹ Do not use solvents for cleaning.
These can damage the surface of your stud welding unit.
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
16 Maintenance and Care
51