Connecting The Stud Welding Unit To The Mains Supply - HBS Visar 650 Operating Manual

11.3

Connecting the Stud Welding Unit to the Mains Supply

Electric shock hazard
‹ Have an electrician check whether the plug socket to which you intended
to connect the stud welding unit is correctly earthed.
‹ Connect the stud welding unit only to a mains supply with the same mains
voltage as that indicated on the type plate.
‹ Compare the current consumption indicated on the type plate with the
fuse of your mains power supply.
‹ Check that the stud welding unit is switched off.
‹ Only now insert the plug into the plug socket.
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
11 Connection
33