Ec Declaration Of Conformity - HBS Visar 650 Operating Manual

EC Declaration of Conformity

EC Declaration of Conformity
in Accordance with Directive 2006/42/EC, Annex II 1 A
(Original EC Declaration of Conformity)
Herewith the manufacturer
HBS Bolzenschweiss-Systeme GmbH & Co. KG
Felix-Wankel-Strasse 18
P.O. Box 13 46
85221 Dachau
GERMANY
Phone
Fax
declares for the following product
Machine information: Stud welding unit
Type:
Order No:
Serial No:
Year of manufacture: 2021
in conjunction with HBS components
that the machinery fulfils all the relevant provisions to this Directive, including changes to the
Directive to be applied at the moment of this declaration.
The product is conform with following further EU Directives, including changes to the Directives
to be applied at the moment of this declaration:
„Low voltage guideline" 2014/35/EU
„EMC guideline" 2014/30/EU
„Directive on the restriction of the use of certain hazardous substances in electrical and
electronic equipment" 2011/65/EU
Following harmonised standards (or parts thereof) were applied:
DIN EN 60974-1
DIN EN 60974-10 Arc welding equipment - Part 10:
DIN EN 60204-1
The following national standards and other specifications (or parts thereof) were applied:
VDE 0544-1
Persons who are based in the European community and who are authorised to compile the
technical documentation:
Name: Heike Otto
Dachau, 04.01.2021
Place of issue, Date
54
+49 8131 511-0
+49 8131 511-100
Visar 650
93-60-0650
93-60-0650/211XXXX
Arc welding equipment - Part 1:
Welding power sources
Product standard for arc welding equipment
Safety of machinery - Electrical equipment of machines;
Part 1: General requirements
Address: see manufacturer
Gregor Gröger (CEO HBS)
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
©HBS Bolzenschweiss-Systeme GmbH & Co. KG