Optimisation Of Welding Parameters - HBS Visar 650 Operating Manual

13 Checking the Quality of the Weld
13.3

Optimisation of Welding Parameters

‹ As first step, conduct the tests outlined under points 13.1 and 13.2.
‹ As second step optimise the welding parameters according to the table
under point 12.2 „Determining the Welding Time".
‹ Optimise the welding parameters of the stud welding unit.
‹ Check the settings of the welding gun.
‹ If necessary re-adjust the lift and spring pressure.
‹ Refer here to the operating manual of your welding gun.
46 ©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer