Connection - HBS Visar 650 Operating Manual

11 Connection

11 Connection
‹ First prepare your workplace.
‹ Read and observe here point 10 "Preparing Workplace and Welding Pro-
cess".
Electric shock hazard
‹ Leave the stud welding unit switched off during connection of the connec-
ting leads.
In this way you can avoid any unintentional starting of the welding process.
‹ Secure the cables.
Strong magnetic fields are generated during the welding process that can
lead to whipping of the cables. This can cause the cables to come out of the
plug sockets.
30 ©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer