Table of Contents
Advertisement
Logging In (password protection)
Access using the CLI is password-protected. You can log in as administrator to read and modify the 500
Series switch parameters. Note: The factory defaults admin password is admin.
First press <Escape> to access the Management Console Function.
enter username „admin‟ and then press <Enter>.
Login:
enter password „admin‟, then press <Enter>.
Password:
(see section on user defined password)
Example:
Managing IGMP Snooping.....................
Exit to return to Management Console Function.
Press [ESC] to Exit >
** Now in user interface mode. **
** IGMP Snooping will resume after power is cycled. **
Login - (Enter Username)> admin
Username is correct.
Login continued - (Enter Password)> *****
Password is correct.
CUSTOMER USER VALIDATED.
/
(Go to top of menu tree)
?
(Show menus/commands)
info
(Show identification data)
SYSTEM
SWITCH
CLI>
You can now activate the commands of the CLI.
(Revised 2011-07-13)
(Open system menu)
(Open switch menu)
19
Advertisement
Table of Contents
