Ingress Protection Ip67; Installation - N-Tron 708M12 User Manual & Installation Manual

Managed industrial ethernet switch
Hide thumbs Also See for 708M12:
Table of Contents

Advertisement

Ingress Protection IP67

The classification of degrees of protection provided by the enclosures is defined by IEC 60529. Each rating
is defined by specific tests.
The IP number is comprised of two numbers, the first referring to the protection against solid objects and
the second against fluids. The higher the number, the better the device is protected against contact with
moving parts and the harmful entry of various forms of moisture.
st
1
IP
Protection against ingress of solids
0
No protection
1
Protected against solid objects over 50mm e.g. hands,
large tools.
2
Protected against solid objects over 12mm e.g. hands,
large tools.
Protected against solid objects over 2.5mm e.g. wire,
3
small tools.
4
Protected against solid objects over 1.0mm e.g. wires.
5
Limited protection against dust ingress (no harmful
deposit)
6
Totally protected against dust ingress.
The 708M12 & 716M12 Industrial Ethernet Switches are fully protected against dust and will remain sealed
when immersed in water to a depth of 1 meter for 1 hour when all the ports are properly mated or sealed.
These IP67 caps seal off the unused ports protecting them from dirt, water, oil or any other
contaminants which might be present in the close proximity of the switch.
Please make sure the Ethernet Switch package contains the following items:
1. 708M12 or 716M12 Industrial Ethernet Switch
2. Product CD
Contact your carrier if any items are damaged.

Installation

Read the following warning before beginning the installation:
WARNING
(Revised 2012-10-5)
nd
2
IP
Protection against ingress of liquids
0
No protection
1
Protected against vertically falling drops of water.
2
Protected against direct sprays of water up to 15°
from vertical.
Protected against direct sprays of water up to 60°
3
from vertical.
4
Protected against water sprayed from any direction.
Limited ingress permitted.
5
Protected against low pressure water jets from any
direction. Limited ingress permitted.
6
Protected against high pressure water jets from any
direction. Limited ingress permitted.
7
Protected against temporary immersion between
15cm to 1m.
8
Protected against long periods of immersion under
pressure.
Page 10 of 169

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

716m12

Table of Contents