Table of Contents
Advertisement
Q. SYSTEM'S STATUS CHECK
When you want to check the system's present status
through the LCD screen, Press the transmitter
button twice, within 3 seconds press
It responds with one melody sound.
R. DRIVER PAGING
It is useful the event that someone wants to page the driver of the parked
vehicle.
In Car Driver Paging
Under the ignition switch "off" condition, press and hold the valet switch for 2
seconds to page the driver, one chirp sound shall be emitted from the vehicle
and the paging melody sound continues sounding from you Remote LCD
Transmitter and "
" indication flashes on the LCD screen.
Out of Car Driver Paging
If someone tries to page you by tapping the paging (knock) sensor (optional)
which is usually mounted on the bottom part of front window, the paging
melody sound continues sounding from you Remote LCD Transmitter and
"
" indication flashes on the LCD screen.
1. Press the transmitter
seconds press
driver paging function, It responds with chirps of the
vehicle, a melody sound and "
on the LCD screen to confirm the function is on.
2. When tapping the paging (knock) sensor, one chirp
sound shall be emitted from the vehicle and the
paging melody sound continues sounding from you
Remote LCD Transmitter and "
on the LCD screen.
3.Turn on the ignition switch; OR press the
arm the system; OR press the
disarm the system, this outdoor driver paging function
will exit.
S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as
following:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as
the siren.
(C) button.
button first, within 3
(
) button to activate outdoor
" indication flashes
" indication flashes
button to
button to
20
Advertisement
Table of Contents
