Table of Contents
Advertisement
times within 3 seconds will clear the
flash icon and melody sound o n the LCD screen transmitter
4. Stop The Trigger Melody Sound:
screen will alert user through melody sound and flashing trigger icon, press
any button on the LCD remote transmitter to stop melody sound only.
5. Button Lock:
It is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the
button first, within 3 seconds press and hold
the
( ) button for 2 seconds to activate or cancel the
button lock function, the
screen to show the LCD remote transmitter is on "Button
Lock".
6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear
beep sound from the remote control. The remote control in
this mode will vibrate when your security system is
triggered.
Press the
button first, within 3 seconds press and
hold the
(
) button for 2 seconds to select the mode
of vibration or melody, the
on the LCD screen to show the LCD remote transmitter is
on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short "bi" sound while pressing the button of the LCD screen
transmitter
If you want mute the "bi" sound mute always while press button. Press the
button first, within 3 seconds press and hold the
seconds to disable the "bi" sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short "bi" sound and flash
icon while pressing the button of the LCD screen transmitter.
9. Set Up Fixed Count Down Timer:
1. Press the
button first, within 3 seconds press and hold the
(
) button for 2 seconds, the LCD screen will shows
0:10),
While triggering the alarm the LCD
icon will displayed on the LCD
icon will displayed
8
(Bi) button for 2
icon and timer (i.e.
Advertisement
Table of Contents
