Download Print this page

System Operations - Autopage RS-602 Operation Manual

Professional remote car starter & keyless entry system
Hide thumbs Also See for RS-602:

Advertisement

WARNINGS:
As with any product that performs automatic functions, there are certain safety
precautions that you must practice and be aware of.
1. Keep the transmitter out of children's reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it's in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is
corrected.
8. The use and operations of this system is the sole responsibility of the
operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running
on public streets.
10. THIS DEVISE CANNOT BE USED IN ANY STANDARD TRANSMISSION
VEHICLE. FOR AUTOMATIC TRANSMISSIONS ONLY!
Standard XT-33, 5 Button remote
XT-33
Transmitter
Button
Lock Doors
Unlock Doors
Trunk Release (Channel 3)
-
Activate The Remote Start
-
Stop remote start operation
II
Switching code For 2nd Car
Operation.
**
The first push of the
second push will stop the engine. This is used in the optional XT-11 Ultra
Miniature start only transmitter. For normal use with standard XT-33, Use the
unlock button before entering the vehicle.

SYSTEM OPERATIONS:

System Function
button will send an unlock signal to the doors and the
OPTIONAL: XT-11 Ultra Miniature Remote is for start
only.
This optional remote can be used in applications where the factory
keyless entry system is the main source for arming/locking and
disarming/unlocking the vehicle. For example, vehicles with the
factory smart key/ "push button" start or one-piece remote with key,
an XT-11 Ultra Miniature remote may be purchased for remote start
and unlock only applications.
preferred if your factory remote is integrated within your key.
Press and Hold for 2 seconds
Push twice to start
**
Push Twice to stop engine
For regular remote transmitter
Only
This ultra small remote may be
2
Remark

Advertisement

loading