Fcc Interference Statement - Philio PST07 Manual

Device Reset Locally
Association
Association Group Information
Powerlevel
Basic
Configuration
Notification
Firmware Update Meta Data
Supervision
Transport Service
Battery
Sensor multilevel
Wake up
1 Highest granted Security Class
2 Highest granted Security Class
1 Highest granted Security Class
1 Highest granted Security Class
1 Highest granted Security Class
1 Highest granted Security Class
8 Highest granted Security Class
4 Highest granted Security Class
1 None
2 None
1 Highest granted Security Class
11
Highest granted Security Class
2
Highest granted Security Class
FCC ID: RHHPST07
Disposal
This marking indicates that this product should not be
disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the
return and collection systems or contact the retailer where
the product was purchased. They can take this product for
environmental safe recycling.
Philio Technology Corporation
8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City
24257, Taiwan(R.O.C)
http://www.philio-tech.com

FCC Interference Statement

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions,
interference to radio communications.
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
•
that to which the receiver is connected.
9
may cause harmful
However, there is no