Configuration - Digi AnywhereUSB Series User Manual

Configuration

AnywhereUSB User Manual (90001085_F1)
The Home Page
The left side of the Home page has a list of choices that display pages for
Configuration, Management, and Administration tasks, and to logout of
the Web interface. Clicking Logout disconnects the configuration and
management session with an AnywhereUSB. It does not close the
browser window, but displays a logout window. To finish logging out of
the Web interface and prevent access by other users, close the browser
window. Or, log back on to the device by clicking the link on the screen.
After 5 minutes of inactivity, the idle timeout also automatically performs a
user logout .
Applying and Saving Changes
The Web interface runs locally on the device, which means that the
interface always maintains and displays the latest settings in the
AnywhereUSB.
Cancelling Changes
To cancel changes to configuration settings, click the Refresh or Reload
button on the Web browser. This causes the browser to reload the page.
Any changes made since the last time the Apply button was clicked are
reset to their original values.
Restoring the AnywhereUSB to Factory Defaults
The device configuration can be reset to factory defaults as needed
during the configuration process.
Online Help
Online help is available for all screens of the Web interface, and for
common configuration and administration tasks. There is also tutorial
available on the Home page.
The Getting Started section has a link to a tutorial on configuring and
managing the AnywhereUSB.
The System Summary section notes all available device-description
information.
The configuration section of the Web user interface consists of sub-
menus that are specific to the particular model of the AnywhereUSB unit
being configured. These configuration options may include: Network,
Serial Ports, Alarms, System, Remote Management, and Security.
36