Advertisement
Section
4
1. Install top ledge and ledge covers
NOTE: Depending on your pool model you may have
steel or resin top plates.
a.
Place top ledges on the wall. Align the holes on the
top ledges with those on the top plates. Make sure
the space left between each top ledge is uniform
all around and that the space in question can be
covered by a ledge cover. Attach the top ledges to
the top plates using screws. (Steel-V12x34/Resin
VHL12x114S)
(Image 5)
Steel:
Image 13
Resin:
Image 14
Important Note:
We suggest that you install all the top ledges on the
wall before attaching them.
b.
Place inside ledge cover onto the joiner plate and
attach ledge cover with a screw (Steel-V12x34/
Resin VHL12x114S).
Steel:
Image 15
Resin:
Image 16
Note: During assembly, the inner and outer
components of the ledge cover may have been
slipped into each other for packaging purposes.
16
4-4
No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
C. INSTALLATION OF TOP LEDGE AND LEDGE COVERS
13
14
15
Advertisement
