Advertisement
Section
3
1. Set the liner in place
a.
Open the carton. Do not use anything sharp to
open the carton.
b.
Unpack and unfold the liner and spread it out in the
sun to warm it up. Inspect all the seams and sur-
faces for holes.
c.
Remove your shoes to avoid damaging the base or
tearing the liner.
d.
Spread out the liner, smooth side down. The curved
seam should be centred on the cove at the base of
the wall. The other seams will form straight lines
across the bottom of the pool.
e.
Smooth out all the wrinkles in the bottom.
Important Note:
If possible, unfold the liner on the grass one to two hours
before installation. Be careful not to leave the liner too
long or you may damage the grass.
Important Note:
The liner is generally smaller than the support structure
of the pool. It will stretch more easily when warm. It is
important that the liner is installed on a warm sunny day.
AVOID USING EXTRA COLD WATER AND INSTALLING ON
A COLD DAY.
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
C. INSTALL THE POOL LINER
(Images 16 & 17)
16
17
No Diving or Jumping. Observe all Safety Rules
3-7
Advertisement
