Advertisement
Section
1
1. Mark out the Area
a.
Drive a peg into the ground at the centre of the
area where you want your pool.
b.
Use a length of string tied between the peg and a
can of spray paint, and mark a circle on the ground
(a tape measure can also be used). The circle will
be 12" (30 cm) bigger all round than the pool.
(Image 2)
2. Remove the sod
a.
Remove all sod and plants from the circle.
b.
Remove any sticks, stones and roots from the circle
using a rake.
c.
To make sure your pool is stable, compact the
ground well, use the compactor, before adding the
sand.
Important Note:
Your pool must be perfectly level. Take the time you
need to be sure your foundation is perfecty level.
1-4
No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
GROUND PREPARATION
B. PREPARE THE FOUNDATION OF YOUR POOL
(Image 1)
(Image 3)
1
2
3
Advertisement
