Advertisement
Section
4
1. Install the uprights
a.
The wall joint is hidden behind the upright on most
pools. This assures that the skimmer and skimmer
return holes are not obstructed.
NOTE: Depending on your pool model you may have
steel or resin bottom plates.
b.
Insert an upright into the bottom plate. Ensure that
the upright is correctly inserted into the bottom
plate.
c.
Using two (2) screws (Steel-V12x34/Resin 2PPS101)
attach the bottom of the uprights to the bottom
plates and attach the foot cover.
Steel Bottom Plates :
Resin Bottom Plates:
Proceed with the installation of the uprights
Important Note:
Use the ridges in the pool wall to make sure the upright
column is straight up and down.
4
Important Note:
Ensure to leave a gap between the two bottom rails.
See Diagram:
Please refer to your pool's footprint (Section 1) for gap
measurement.
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
A. INSTALLATION OF THE UPRIGHTS
Images 1 & 2
Images 3 & 4
1
2
3
No Diving or Jumping. Observe all Safety Rules
4-1
Advertisement
