Advertisement
Step 9
You will need:
5 x Wood
Screws
(H4)
Phillips head
screwdriver
Note the position of
Bevelled edge.
Attach Front Support Rail (P8) to Front Plinth (P7) by using 5 Wood Screws (H4) and a
Philip head screwdriver.
Step 10
You will need:
2 x Cam
Nut
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Front Suport Rail (P8) and Back Support Rail (P10) to Bottom Support Rail
(P22), insert Cam Nut (H2) into Centre Rail (P22), rotate the Cam Nuts so the arrow
point towards the incoming cam bolt, turn clockwise to lock.
www.fantasticfurniture.com.au
(H4)
(P8)
x 2
(P22)
(P8)
(P10)
PAGE 9
Advertisement
