Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Ashford Dresser 7 Drawer
Summary of Contents for fantastic furniture Ashford Dresser 7 Drawer
- Page 1 Version 2.0 Ashford Dresser 7 Drawer www.fantasticfurniture.com.au...
- Page 2 WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY. To avoid any serious or fatal injury, this product has been provided with a wall strap to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface. Fixing devices are not included since different surface materials require different attachments.
-
Page 3: Assembly Checklist
Assembly checklist Make sure you have all the required tools. Read through the instructions carefully Never use power tools unless instructed. before you begin. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What you Need Top Panel (P1) To Assemble the Product Right Side Top Panel rail (P3) (P5) Back Panel (P11) Side Plinth Centre (P4) Panel (P20) Back Panel (Other Tools You Need) (P11) Phillips Head Screwdriver Mallet Drawer Support Rail(P16) Large Drawer Left Side... - Page 5 Step 1 You will need: 6 x Cam bolts (H1) Phillips head screwdriver (P1) Fix 6 x Cam Bolts (H1) to Top Panel (P1) by using a Phillips head screwdriver. Step 2 You will need: 3 x Wood (P5) Screws (H4) Phillips head screwdriver...
- Page 6 Step 3 You will need: (H21) 2 x Wooden Dowels (H3) 3 x Left Runner Track (H11) (H21) 3 x Right Runner Track (H12) 18 x Wood Screws (H21) Phillips head Mallet screwdriver Insert 2 Wooden Dowels (H3) to Center Panel (P20). Fix 3 Right Runner Track (H12) to Center Panel (P20) by using 9 Wood Screws (H21) and a Phillips head screwdriver.
- Page 7 Step 5 You will need: 2 x Wooden (H9) Dowels (H3) 4 x Right Runner Track (H12) 12 x Wood Screws (H9) (P3) Phillips head screwdriver Mallet Insert 2 Wooden Dowels (H3) to Right Side (P3). Fix 4 Right Runner Track (H12) to Right Side (P3) by using 12 Wood Screw (H9) and a Phillips head screwdriver.
- Page 8 Step 7 You will need: 3 x Wood (H1) Screw (H4) 6 x Cam bolts (H1) Phillips head screwdriver Note the position of Bevelled edge. Attach Side Plinth (P4) to Right Side (P3) by using 3 Wood Screws (H4) and a Philip head screwdriver.
- Page 9 Step 9 You will need: (H4) (P8) 5 x Wood Screws (H4) Phillips head screwdriver Note the position of Bevelled edge. Attach Front Support Rail (P8) to Front Plinth (P7) by using 5 Wood Screws (H4) and a Philip head screwdriver. Step 10 You will need: 2 x Cam...
- Page 10 Step 11 You will need: 4 x Cam (H2) 2 x Cam bolts (H20) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 11 Step 13 You will need: 6 x Cam Nuts (H2) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 12 Step 15 informative label nearby (P11) (P11) Slip Back Panels (P11) into the grooves on the side panels. Step 16 You will need: 6 x Cam Nuts (H2) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut.
- Page 13 Step 17 You will need: 4 x Nuts (H5) 4 x Wood (H5) Screws (H6) 4 x Wood Screws (H15) (H15) Phillips head screwdriver Fix Screws (H15) between 2 pieces of Back Panels (P11) to Back Rai l(P9) with 4 Wood Screws(H15). Fix Back Panel Support (H5) to each cornor on the back with Wood Screws(H6).
- Page 14 Step 19 (P13) You will need: 4x Wood Screws (H10) Phillips head screwdriver (P13) (P12) Fix DrawerSides (P13) to Large Drawer Front (P12) by using Wood Screws (H10). Step 20 You will need: 2 x Cam Nuts (H19) Phillips head screwdriver This is how a cam nut works..
- Page 15 Step 21 With lamination face inside Slip Large Drawer Base (P15) into the grooves on the Large Drawer Sides. Step 22 You will need: 8 x Wood Screws (H10) Phillips head screwdriver Use Wood Screws (H10) to fix Drawer Back panel to Drawer Sides and Drawer Support Rails.
- Page 16 Step 23 (H9) You will need: 6 x Wood Screws (H9) (H14) 1 x left Runner (H13) (H13) 1 x Right Runner (H14) Phillips head screwdriver Fix Left Runner (H13) and Right Runner (H14) to drawer side panels by using Wood Screws(H9) and a Philip head screw driver.
- Page 17 Step 25 You will need: 24 x Wood Screws (H10) Phillips head screwdriver Attach Drawer Side (P13) to Drawer Front (P17) by using Wood Screw (P10) and a Philip head screw driver. Step 26 with lamination face inside Slip Drawer Base (P19) into the grooves on the Drawer Sides. PAGE 17 www.fantasticfurniture.com.au...
- Page 18 Step 27 You will need: 24 x Wood Screws (H10) Phillips head screwdriver Use Wood Screws (H10) to fix Drawer Back Panel (P18) to Drawer Sides. Step 28 You will need: 12 x Screws (H7) 6 x Handles (H8) Phillips head screwdriver Fix Handles (H8) on Drawer Front with Screws (H7).
- Page 19 Step 29 You will need: 36 x Wood Screws (H9) 6 x left Runner (H13) 6 x Right Runner (H14) Phillips head screwdriver Fix Left Runner (H13) and Right Runner (H14) to drawer side panels by using Wood Screws (H9) and a Philip head screw driver. Step 30 (P12) Slide the drawers into the carcase...
- Page 20 Step 31 You will need: 1 x Wall Strap (H16) We strongly advise that you use 1 x Washer the wall safety strap provided to (H17) prevent the unit toppling. 1 x Wood Screws (H10) Phillips head screwdriver (H16) (H17) (H10) Fix Wall Strap (H16) to back of the Top Panel by using Wood Screw (H10) and Washer (H17).
- Page 21 Step 32 Wall You will need: 1 x Washer (H17) (H17) Phillips head screwdriver Screw and Wall Plug are not provided. Please use appropriate fixtures for your wall. Seek advice from a qualified trades person on how to attach safety strap to the wall .
- Page 22 PAGE 22 www.fantasticfurniture.com.au...