fantastic furniture Ashford Dresser 7 Drawer Manual page 11

Step 13
You will need:
6 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Left Side (P2) to Rails as shown, insert Cam Nut (H2) into Rails (P6, P8), rotate
the Cam Nuts so the arrow point towards the incoming cam bolt, turn clockwise to lock.
Step 14
You will need:
6 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Right Side (P3) to the rails as shown, insert Cam Nut (H2) into Rail (P6, P8),
rotate the Cam Nuts so the arrow point towards the incoming cam bolt, turn clockwise
to lock.
www.fantasticfurniture.com.au
x 6
x 6
PAGE 11