Advertisement
Step 19
You will need:
4x Wood
Screws
(H10)
Phillips head
screwdriver
Fix DrawerSides (P13) to Large Drawer Front (P12) by using Wood Screws (H10).
Step 20
You will need:
2 x Cam
Nuts
(H19)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Drawer Support Rail (P16) to Large Drawer Front (P12), insert Small Cam
Nuts (H19) into Rails (P16), rotate the Cam Nuts so the arrow point towards the
incoming cam bolt, turn clockwise to lock.
www.fantasticfurniture.com.au
(P13)
(P13)
(P12)
PAGE 14
Advertisement
