Advertisement
Step 15
Slip Back Panels (P11)
into the grooves on the
side panels.
Step 16
You will need:
6 x Cam
Nuts
(H2)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Top Panel (P1) to the unit as
shown, insert Cam Nut (H2) into
Side Panels (P2, P3), rotate the
Cam Nuts so the arrow point
towards the incoming cam bolt, turn
clockwise to lock.
www.fantasticfurniture.com.au
(P11)
(P11)
informative
label nearby
top
x 6
PAGE 12
Advertisement
