Advertisement
Step 11
You will need:
4 x Cam
Nut
(H2)
2 x Cam bolts
(H20)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Front Rail (P6) to Center Panel (P20), insert Cam Nut (H2) into Rails (P6),
rotate the Cam Nuts so the arrow point towards the incoming cam bolt, turn clockwise
to lock.
Step 12
You will need:
4 x Wood
Screws
(H22)
1 x Allen
Key
(H23)
Attach Bottom Support Rail to Centre Panel by using Screws (H22) and Allen Key (H23).
Attach Back Rail (P9) And Front Rail (P21) to Center Panel by using Screws(H22) and
Allen Key (H23).
www.fantasticfurniture.com.au
x 4
x 2
x 4
PAGE 10
Advertisement
