Related Manuals for MRC MHK 1-6D
Summary of Contents for MRC MHK 1-6D
- Page 1 Digital Ceramic Hotplate With Stirrer MHK 1-6D Operation Manual 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 2 MRC makes no representations or warranties with respect to this manual. In no event shall MRC be held liable for any damages, direct or incidental, arising out of or related to the use of this manual.
-
Page 3: Table Of Contents
Power On Change the Set Value (SV) Stir Control Knob Section 5 Maintenance………………………..…………….……….….………5-1 Cleaning Product Relocation Keeping Product Section 6 Troubleshooting …………….……………………………….….…6-1 Section 7 Warranty Information………….…………………………..….….7-1 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 4: Warning And Cautions
After the smoke or odor disappears, contact your dealer or MRC if any repair is required. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529... - Page 5 • DO NOT use metal pots, sand bath or other insulating material. • To avoid electric shock, always use a property grounded electrical outlet of correct voltage, and correct handling capacity equipment 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 6 SCR power controllers. • Before cleaning, make sure to unplug the power cord to avoid electric shock or fire. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 7 • Connect the instrument to a ground mains outlet, after ensuring that the Voltage is the same as given on the name plate • The Instrument must be connected to an earthen (grounded) supply 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 8: General Description
General Description Section 2 Congratulations of your purchase of MRC hotplate which is specially designed to provide maximum benefit for your investment with respect to performance, safety, ease of use, and durability. Item/Model MHK 1-6D Dimension (W x D x H, mm) -
Page 9: Convenience
Construction (1) Ceramic Top Plate (2) Heating Indicator (3) Stirring Control Knob (4) C22 Temperature Controller (5) Specific heating switch for each plate 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 10 (6) Socket for Temperature Probe (K) (7) Threaded Holes for Support Rod (Optional) (8) Main Power Switch (9) Power Cord (10)Fuse (230V/15A) (11) Identification Label 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 11: Unpacking And Installation
If such damage is found, notify the carrier immediately. After unpacking, check to ensure that all the following parts and accessories are included in the package. If not, contact your dealer or MRC immediately. Item Quantity Main Body... -
Page 12: Connecting To Power Supply
• Observe the minimum distances (in general, 30 cm or 12 inches) from other devices. In addition, any device which can be affected by the motor vibrations should not be placed near this equipment. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 13: Connecting To The Main Power
• In order to prevent fire or power cord damage due to overloading, do not use power strips or improper extension cords. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 14: Operation
NOTICE • You can change the temperature setting even during operation. • Changing the temperature setting is allowed only within the low and high temperature limits. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 15: Stir Control Knob
Please note that the viscosity of the stirred material will affect the ability of the stir bar to remain coupled to the rotating ring magnet. Materials of high viscosity must be stirred at slower speed settings. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 16: Maintenance
• Keep the ceramic top clean. A nonabrasive cleaner may be used to clean the ceramic top • Inspect the ceramic top for damage during cleaning. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 17: Relocation
• Pay attention to avoid mechanical shock or vibration while moving the instrument. Damages caused by mechanical shock or vibration may result in injury or fire. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 18: Keeping Product
(1) Disconnect the power cord from the power outlet and clean the equipment with soft cloth. (2) Pack the equipment properly and make sure to store it in dry place. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 19: Troubleshooting
Replace the damaged part with a Power outlets, plug, controller proper one. Internal circuit failure Contact MRC for service Disconnect all the appliances connected to the breaker first and reconnect them Electrical overload one by one to find the reason for the Repetitive tripping of overload. -
Page 20: Warranty Information
• The Technical Services Department must give prior approval for return of any components or equipment. • Your MRC Sales Office is ready to help with comprehensive site preparation information before your equipment arrives. Printed instruction manuals carefully detail equipment installation, operation and preventive maintenance.
Need help?
Do you have a question about the MHK 1-6D and is the answer not in the manual?
Questions and answers