Advertisement
Step 5
You will need
Allen Key
(H2)
4 x Spring Washers
(H8)
(P1)
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre rail (P6) between the headboard (P1) and footboard (P2) and attach using
4 x bolts (H4), 4 x spring washers (H8) and 4 x washers (H5). Do not fully tighten the bolts until
Step 7.
Adjust the 2 x support legs (P4) so the adjusters are sitting approximately 10mm off of the floor.
With assistance, move the bed to its final position.
Step 6
You will need
14 x Centre
28 x End
Connectors
Connectors
(P8)
(P7)
28 x Slats
(P9)
Attach 2 x end connectors (P7), 2 x slats (P9) and 1 x centre connector (P8)
together as shown.
fantasticfurniture.com.au
4 x Medium Bolts
4 x Washers
(H4)
(H5)
(P5)
(P6)
(P5)
1
(P7)
(H5)
(H8)
(P2)
(P9)
(P8)
(H2)
(H4)
(P6)
(P9)
(P7)
Page 7
Advertisement
