Alignment In X- Spindle Center - Index TRAUB MS16 Manual

Alignment in X- spindle center

• Axis alignment and Y alignment should be done already
• Insert mounting screws (5)
• Loosen clamp (12) for adjusting screw (11)
• Adjust spindle center in the X-direction with adjusting screw (11)
• Measure drill holder with dial gauge
• +/- 2 mm setting range possible
• Tighten clamp (12) for adjusting screw (11)
• Tighten mounting screws (5)
5
5
12
11
Product note
Base holder for boring slide
W9800029EN-02.02.18
5
5
12
11
17