26
Chapter 3: Configuration
Chapter 3: Configuration
SolarEdge Device Firmware Version
To ensure proper communication with the inline meter, make sure that the inverter
communication board firmware (CPU) version is up-to-date.
NOTE
If the inverter uses an earlier firmware version, it will automatically upgrade the CPU
to the required version upon connection of the inverter to SetApp. In the event that
an upgrade is required, open SetApp, making sure that your smart phone has an
Internet connection. This will enable it to download the most up-to-date CPU version.
To check the inverter CPU version using SetApp:
1. Select Commissioning è Information to view the CPU Version.
CPU Version
DSP1 Version
DSP2 Version
Serial Number
Hardware IDs
Error Log
Warning Log
Information
4.13.xx
1.0210.1066
2.0052.0410
7Fxxxxxx-yy
Inline Energy Meter with SolarEdge Energy Net Communications
›
›
›