Send Settings - Fax - Epson WF-4820 Series User Manual

Setting
Distinctive Ring
Rings to Answer
Remote Receive
Rejection Fax
Parent topic:

Send Settings - Fax

Set the send options you want to use for outgoing faxes.
Setting
Wait Time for Next
Original
Fax Preview Display
Time
Options
All
Single
Double
Triple
Double&Triple
1 to 9
Off
On
Start Code
Various
Selecting Advanced Fax Settings
Options
Off
On
Off
On
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so
your product can receive faxes on the correct
number of rings. Select All for phones lines that do
not use this service.
Sets the number of rings before your product
receives a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product,
make sure this setting is set higher than the number
of rings your answering machine is set to answer a
call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you select On, you must also
set a Start Code. If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
Lets you automatically reject faxes from blocked
numbers, with blank headers, or from unrecognized
contacts.
Description
Sets a time in between sending the next fax
Sets a time for previewing the scanned document on
the LCD screen before it is sent
215