Turning Off The Operation Time Out Setting - Epson WF-4820 Series User Manual

You see a screen like this:
4. Select Basic Settings.
5. Select LCD Brightness.
6. Do one of the following:
• Press the – or + icons to decrease or increase the brightness.
• Press the brightness level on the LCD screen, select a number from the on-screen keypad, and
press OK.
7. Select OK to exit.
Parent topic:

Turning Off the Operation Time Out Setting

The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
1. Press the
2. Select Settings.
3. Select General Settings.
Using the Control Panel
home button, if necessary.
29