How To Select And Perform A Test - palintest Lumiso Ammonia User Manual

6

How to Select and Perform a Test

This is the basic procedure for all tests. For specific test details
please refer to the Test Instructions.
1
12:28:49
16-07-2021
Nes 100N
2
12:28:49
16-07-2021
Nes 100N
Blank
Lumiso Lumiso
A Palintest Product A Palintest Product
Nes 15N
Nes 50N
Ammonia Pooltest
Lumiso Lumiso
A Palintest Product A Palintest Product
Nes 15N
Nes 50N
Pooltest
Ammonia
Read
The test selection menu
appears when first starting
up Lumiso.
From most other screens,
pressing "back"
twice, will take you back to
the test selection menu.
Select a test, using the up and
down keys until the desired
test is highlighted.
These tube icons
will usually appear.
These indicate that the left
key is for "blanking" and
the right key
Please Note: The read icon
only appears after the blanking stage
has been completed. Lumiso will require
blanking to be repeated after 50
minutes or if it registers a significant
change in environmental temperature.
once or
is for "reading"