How To Select And Perform A Test - palintest Lumiso Pooltest 3 User Manual

6

How to Select and Perform a Test

This is the basic procedure for all tests. For specific test details
please refer to the Test Instructions.
1
12:28:49
18-01-2021
2
12:28:49
18-01-2021
Blank
Lumiso
A Palintest Product
Chl(0–5)
Chl(0–10)
pH
Pooltest
Lumiso
A Palintest Product
Chl(0–5)
Chl(0–10)
pH
Pooltest
Read
The test selection menu
appears when first starting
up Lumiso.
From most other screens,
pressing "back"
twice, will take you back to
the test selection menu.
Select a test, using the up and
down keys until the desired
test is highlighted.
These tube icons
will usually appear.
These indicate that the left
key is for "blanking" and
the right key
Please Note: The read icon
only appears after the blanking stage
has been completed. Lumiso will require
blanking to be repeated after 50
minutes or if it registers a significant
change in environmental temperature.
once or
is for "reading"