Download  Print this page

About This Manual - Sony RM-TP504 Primary Operating Instructions Manual

Remote commander
Hide thumbs


To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
For the customers in United States
Battery may explode if mistreated, do not recharges, disassemble
or dispose of in fire.
When the battery becomes weak or dead, replace the battery with
a Sony CR2032 lithium battery, use of any other battery may
present a risk of fire or explosion.
Dispose of used battery promptly, keep away from children.
These cells are intended for use at ordinary temperatures where
anticipated high temperature excursions are not expected to
exceed 100 °C (212 F).
These cells should not be connected in series with electrical
power source that would increase the forward current through
the cells.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and control
– Connect the equipment into an outlet on a circuit different from
that to which the control amplifier is connected.
– Consult the dealer or an experienced radio/TV technician for
You are cautioned that any changes or modification not expressly
approved in this manual could void your authority to operate
this equipment.
For the customers in Europe
CAUTION (Lithium battery CR2032)
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Discard used batteries according to
the manufacturer's instructions.
On safety
Should any solid object or liquid fall into the cabinet, unplug the
receiver and have it checked by qualified personnel before
operating it any further.
On operation
Before connecting other components, be sure to turn off and
unplug the receiver.
On cleaning
Clean the cabinet, panel and controls with a soft cloth slightly
moistened with a mild detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such as alcohol or
If you have any question or problem concerning your
commander, please consult your nearest Sony dealer.

About This Manual

• The following icon is used in this manual:
z Indicates hints and tips for making the task easier.

Hide quick links:



  Related Manuals for Sony RM-TP504 Primary