This chapter describes how to prepare
the remote commander for operation.
Be sure to read this section before
This unit is a remote control system that utilizes infrared
rays to control a receiver and AV components connected
to the receiver.
This unit can be used to operate Sony AV components as
well as AV components made by other manufacturers.
Setup is necessary in order to operate components made
by other manufacturers (see page 23).
Depending on the component, control may not be possible using
This unit is a 2 way remote commander. Not only does it
transmit infrared rays for operation of the receiver, it also
receives infrared rays emitted by the receiver to display
characters and other information from components
connected to the receiver with a CONTROL A1/A1