Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GSWeb Playground Equipment GS-W6001
Summary of Contents for GSWeb Playground Equipment GS-W6001
-
Page 2: Parts Check List
GS-W6001 PARTS CHECK LIST NO. Name Description Size Material Remarks MP139 MAIN POST Φ139.8 X L4200 Galvanized Steel UV polyester powder coating RC22 1 SET MULTI COMPOUND ROPE Φ22, Φ20 Nylon NCP150 PLASTIC POST CAP Φ150 X H90 MC Nylon... - Page 3 MODEL NO. HEXAGON NET CLIMBER INSTALLATION MANUAL GS-W6001 GSWeb Playground Equipment 1046-3, Najeon-ri, Saengnim-myeon, Gimhae-si Gyeongsangnam-do, 621-821, Republic Of Korea Tel) +82. 55. 326. 9096~7 Fax) +82. 55. 326. 9022 E-mail) gswebinfo@chol.com Web site) www.gsweb21.com GSWeb Playground Equipment...
- Page 4 -loaded Nylon cables and comes protected against UV. W: 26' 11" / 8.20m H: 12 ' 10" / 3.90m The GS-W6001 features GS Web Technology which includes Use zone: the highest steel content and the strongest connection materials in the industry, including a steel-wire core in our edge ropes L: 36' 9"...
- Page 5 This distance in based on the centre of gravity height of the maximum user. Figure-2: Fall height and Safety Zone Imperial/Metric conversion 6' = 1830mm 13' 5" = 4100mm 38' 11" = 11860mm GSWeb Playground Equipment...
- Page 6 MODEL NO. HEXAGON NET CLIMBER Foundation Information GS-W6001 Foundation Please refer to GS-W6001 drawing for installation dimension Pole Figure-4: Foundation section view Level Line Finished ground Finished Grade surface layer Figure-3: Excavate enough materials to allow for proper depth of concrete footings...
-
Page 7: Foundation Layout
Concrete footing and Anchor plate layout 4" 4" Imperial/Metric conversion Positioning Anchor plate on footing 13' 5" = 4100mm [CF] 'L" anchor hole Front edge of anchor plate must be installed 4" / 100mm from edge of concrete footing. Anchor Plate position GSWeb Playground Equipment... - Page 8 1 frame (24" / 600mm L x 24" / 600mm W x 27-½" / 700mm H) *Use ½" (min) plywood; not included in package 5-⅞" NOTE: Use anchor plate as guide for exact measurements. (a) wood jig for Anchor plate (b) wood support frame for concrete Figure-6: Wood support frame GSWeb Playground Equipment...
-
Page 9: Concrete Footings
Allow 3-5 days for concrete to cure before proceeding to next step. [concrete footing work] *Concrete is to be wet concrete with minimum 25 MPA. Pour wet concrete in the wooden support frame Figure-7: Concrete footing work GSWeb Playground Equipment... - Page 10 HEXAGON NET CLIMBER Remove the wood support frame GS-W6001 Remove wood support frame from dry concrete blocks After concrete has cured enough, remove frames and replace soil around footing to subgrade level Figure-8: remove wood support frame GSWeb Playground Equipment...
- Page 11 MODEL NO. HEXAGON NET CLIMBER Anchor Plate Assembly GS-W6001 Figure-9: concreted block - clean threads of "L" anchor bolts (a) Anchor Plate (b) Post plate Figure-10: Attach Anchor plate to footing with flat washer, locking washer and nut. GSWeb Playground Equipment...
- Page 12 MODEL NO. HEXAGON NET CLIMBER Post Assembly GS-W6001 Post Assembly Insert Post following nylon string STEP-2 STEP-1 Nylon string Figure-12: Insert Post Figure-11: Find Nylon String following Nylon string GSWeb Playground Equipment...
- Page 13 After inserting post, join main rope with M10 x L25 bolt and M16 Eye bolt on the top plate of post STEP-3 Figure-14: U-bolt assembly. STEP-4 Note: Rubber mallet may be required to insert cap into post. Figure-13: Insert Post into the Center of Net. Figure-15: Post cap assembly. GSWeb Playground Equipment...
- Page 14 Figure 16. After successfully preparing the net and mast assembly, attach safety cable with M22 X L110 H/T Bolt to Anchor plate as shown below M22 X L110 H/T BOLT Figure-16: Attach cable to (A) (B) (C) (D) GSWeb Playground Equipment...
- Page 15 MODEL NO. HEXAGON NET CLIMBER Placing Post in Position GS-W6001 It is strongly recommended that 3-4 workers lift the net into place. [ Working Process ] Figure-18: Centre Post Figure-19: Safety cables attached GSWeb Playground Equipment...
- Page 16 HEXAGON NET CLIMBER Stand Net up GS-W6001 After standing up the Net, Attach remaining safety cables and Turnbuckles Figure-21: Loosen Turnbuckle: all the way (about 100mm), leaving only 4 or 5 threads attached Figure-20: Stand Net up GSWeb Playground Equipment...
- Page 17 M22 X L110 H/T BOLT Figure-22: Tightening Turnbuckles Tighten Rope with Turnbuckles at the Same time (a) + (a) Tighten Rope with Turnbuckles at the Same time (b) + (b) Tighten Rope with Turnbuckles at the Same time (c) + (c) GSWeb Playground Equipment...
- Page 18 After Net structure tension is completed, the net will stretch slightly over the first four weeks of use. Following this initial period, the net needs to be fully re-tensioned by Turnbuckle after 1 year. Figure-24: completed Net GSWeb Playground Equipment...
-
Page 19: Parts List
GS-W6001 7: H/T bolt,nut washer 1: main post 8: U-bolt 2: multi compound rope 9: main post plate 3: post cap 10: L-anchor 4: turn buckle bolt,nut,washer 5: anchor shackle 11: anchor plate 6: shock proof ring GSWeb Playground Equipment... - Page 20 HEXAGON NET CLIMBER Maintenance Installation GS-W6001 A weekly check of the activity net is recommended to ensure that no acts of vandalism have damaged the rope. Periodic checks on tension will assist in the durability of the product. GSWeb Playground Equipment...
-
Page 21: Maintenance
GSWeb Playground Equipment... - Page 22 Repairs during operation that could put the safety of maintenance personnel of the public at risk, should be avoided. F. Equipment alterations Alterations to parts of a piece of equipment or structure that could affect the essential safety of the equipment should only be carried out after consultation with the manufacturer or a compete person. GSWeb Playground Equipment...
Need help?
Do you have a question about the GS-W6001 and is the answer not in the manual?
Questions and answers