Figure 10. Remove the Wi-Fi card
Screw specifications
M2 x L3.5
Go to
https://support.lenovo.com/partslookup
part:
Wi-Fi card
Remove the solid-state drive (SSD) mylar
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove one SSD.
Note: For details, see "Remove the solid-state drive (SSD) module" on page 31
Step 3.
Peel off the SSD mylar.
Figure 11. Peel off the SSD mylar
34
Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part number of the following replacement