Figure 29. Remove the fingerprint board
Screw specifications
M1.2 x L3
Go to
https://support.lenovo.com/partslookup
replacement parts:
Cu Foil mylar
Fingerprint board
Remove the strip cover
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the solid-state drive (SSD) module" on page 31
"Remove the battery pack" on page 33
"Remove the Wi-Fi card" on page 33
"Remove the solid-state drive (SSD) mylar" on page 34
"Remove the DC-in bracket" on page 35
"Remove the memory module mylar" on page 35
"Remove the memory module" on page 36
"Remove the heat sink" on page 37
"Remove the fans" on page 38
"Remove the system board" on page 43
Step 1.
Remove two screws and open the latches.
46
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following