"Remove the fans" on page 38
"Remove the system board" on page 43
"Remove the strip cover" on page 46
Step 1.
Remove two screws.
Figure 32. Remove two screws
Screw specifications
M2.5 x L5
Step 2.
Remove two screws and then lift the LCD module.
Figure 33. Remove six screws and then lift the LCD module
Screw specifications
M2.5 x L2.3
Step 3.
Take out the EDP cable and then remove the LCD module.
48
Hardware Maintenance Manual
Number of screws
2
Number of screws
2