Go to
https://support.lenovo.com/partslookup
part:
Hinge cover
Remove the LCD panel
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 47
"Remove the hinge cover" on page 50
"Remove the LCD bezel" on page 50
Step 1.
Remove two screws and then remove the hinge caps.
Figure 37. Remove two screws and remove the hinge caps
Screw specifications
M2.5 x L2.3
Step 2.
Remove the three pieces of removable tape with tweezers.
Figure 38. Remove the three pieces of removable tape with tweezers
to look up the Lenovo part number of the following replacement
Number of screws
2
.
Chapter 4
Removing a FRU or CRU
51