Installation
3.4 Electrical Installation for AC Wiring
- To avoid shock hazard during cabling, insure any live grid connections are
removed from the inverter.
- Code compliance is the installer's responsibility.
- Inverter warranty void if the DC input voltage exceeds 1100 Vdc.
- Installation for AC terminal must meet the local electrical code.
- Failed to follow the instructions may damage AC cable.
- In order not to damage the components in the inverter, ensure the correct
conductor is connected to the appropriate AC terminal on the inverter.
- Please follow the instruction of Section 5.1 to open or close the front door.
DANGER : ELECTRICAL HAZARD!!
WARNING !
CAUTION !
ATTENTION
28