Advertisement
Open-gate function
Where allowed by the system and correctly confi gured, you can send an operator opening/
closing command by pressing and holding the
indicates the status of the operator.
☞ The function must be activated on the receiver when the call is being associated
during system programming.
Door status function
Where allowed by the system, the door release LED indicates the current status of the door.
The function is active during the steps that involve communicating with the entry panel and
the signal refers to the entrance associated with the entry panel.
AGT A EVO intercommunication
key (> 3s). The door release LED
To call an internal receiver, pick up the
Int. 1
handset and press the button for the receiver
you want.
During a conversation between internal
receivers, a call from an entry panel is
signalled to the receivers by a beep that
repeats every 5 seconds.
Int. 1
3 successive beeps indicate that the line is
busy and a call cannot be made.
Advertisement
