Advertisement
Function of buttons
Door release button / Open-gate command if pressed for > 3 seconds.
Door release LED: fl ashing when calling/ fi xed when the open-gate function is active.
Auxiliary 2 / Porter call
AUX2 LED: Porter missed call alert.
Intercom 1: if the second function is activated, the key function becomes "Intercom
4". Prolonged operation enables/disables the "automatic door release" function.
Intercom 2: if the second function is activated, the key function becomes "Intercom 5".
Intercom 3: if the second function is activated, the key function becomes "Intercom 6".
Press and hold for < 2 seconds (the white LED fl ashes) to enable intercom calls
from 4 to 6.
Press and hold for > 2 seconds (the white LED fl ashes) to send a panic signal to the
porter (where present).
LED functions:
Flashing light with second function and PANIC active. Fixed light with automatic
door-release function active.
Setting the ringtone
Press repeatedly to adjust the ringtone volume: low, high, off (red LED on).
Activating this button during a conversation excludes the microphone until it is
activated again or the communication ends.
☞ Only use soft, dry or slightly damp cloths for cleaning; do not use any chemical
products.
Advertisement
