Samson VLX Owner's Manual page 9

uided Tour - VH2
uided Tour - VT2L / VT2
a
( AM ON )
2
odel x/n
OFF ON
4
3
5
4
13
8: Audio Input Level control (trimpot) - This input sensitivity control
has been factory preset to provide optimum level for the particular
lavalier or headset model being used (in the case of the VT2G, it is
preset for optimum instrument level) and so we recommend that this not
be adjusted manually. If necessary, however, you can use the supplied
plastic screwdriver to raise or lower the VT2L / VT2G input level. See
the " Setting Up and Using the VLX VLX TD System " section on page
16 for more information.
1 : Audio on-off switch - When set to the " On " position, audio signal is
transmitted. When set to the " Off " position, the audio signal is muted.
The advanced circuitry in the VLX / VLX TD system ensures that no
" pop " or " thud " will be heard during muting. Note that turning this off
does not turn off the VH2 power — it is simply a way to temporarily mute
the transmission of audio signal. If you don ' t plan on using the VH2 for
extended periods, turn off its power by using the power on-off switch
(see #3 on the next page).
AuoidX \
EO/
f
A
94 BATT J
/ ON
Ch 13
OFF ON
£
eb
D@-
POWER LEVEL