Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Samson XPD2
Summary of Contents for Samson XPD2
- Page 1 XPD2 Handheld USB Digital Wireless System Quick Start Guide...
-
Page 2: Important Safety Information
Hereby, Samson Technologies Corp., declares that this Stage XPD2 (RX:RXD2, TX:HXD1 or PXD1) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. - Page 3 The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. XPD2 USB Digital Wireless System...
- Page 4 Please visit www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in its original carton. If your XPD2 USB Digital Wireless System was purchased outside of the United States,...
- Page 5 RXD2 Controls USB Connector - Plugs into the USB jack on the rear panel of a wirelessly enabled Samson audio device. The receiver can also plug directly into a computer USB port and will be recognized as a USB audio device. The unit passes audio to the device and receives power from the device through this connector.
- Page 6 HXD1 Controls Status Indicator - This LED displays the operation mode: Amber: Normal Operation Flashing Amber: Pairing / Low Battery Power/Pair Switch - Press less than 5 seconds to turn the unit on or off. Press more than 5 seconds to enter pair- ing mode.
-
Page 7: Quick Start
Place a fresh set of AA (LR6) batteries in the transmitter battery holder, taking care to observe the polarity markings. If using a Samson audio device, turn the wireless level knob on the audio device completely counterclockwise, then turn the power of the audio device to the ON position. -
Page 8: Computer Setup
Apple MAC OSX Plug the RXD2 receiver into an available USB port. Select the XPD2 as the computer’s audio input, open System Preferences from the dock or the main Apple Menu. Next, open the Sound preferences, choose the Input tab and select “Samson RXD Wireless Receiver”. - Page 9 AC outlet. Turn the volume on the input channel that you are connecting to the XPD2 system all the way down. Using a 1/8” (3.5mm) cable, connect the RXD1 LINE / Headphone output to the line input on the audio device.
-
Page 10: Connecting To A Smartphone
To use the XDP2 system with an iPhone or iPad, you will need to use the Apple Lightning to USB Camera Adapter (not included). To use the XPD2 system with an Android device, you will need to use a Host OTG adapter. You can connect headphones to the 1/8” (3.5mm) Headphone... -
Page 11: Specifications
5V DC Dimensions (LxDxH) 3.5” x 0.9” x .31” 89mm x 23mm x 8mm Weight 0.35oz / 10g At Samson, we are continually improving our products, therefore specifications and images are subject to change without notice. XPD2 USB Digital Wireless System... - Page 12 Having Trouble with your XPD2 Wireless System? We can help! CONTACT OUR SUPPORT TEAM: support@samsontech.com Our experts can help you resolve any issues. Follow us: @samson @samsontech @samson_technologies Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 Phone: 1-800-3-SAMSON (1-800-372-6766)
Need help?
Do you have a question about the XPD2 and is the answer not in the manual?
Questions and answers