Classic Exhibits VISIONARY DESIGNS MOD-1204 Instruction Manual

Order #XXXXX - MOD-1204 - Kiosk Assembly
Modul Extrusion Part List
Item Qty. Description
1 1 44.5"h Round Vertical Extrusion w/ Connector Attached
2 1 44.5"h Round Vertical Extrusion
3 1 44.5"h Round Vertical Extrusion w/ Connector Attached
1 44.5"h Round Vertical Extrusion
4
5 4 9.029"w Horizontal Extrusion
5a 1 9.029"w Horizontal Extrusion
6 2 13"w Horizontal Extrusion
4
2
5
Insert Size:
9.529"w x 38.417"h
3
1
5
w w w . c l a s s i c e x h i b i t s . c o m
Euro LT Panel System Part List
Item Number Description
1 Curve Panel
2 Curve Panel w/ Door
3 Curve Panel
Counter Top
Internal Shelf
3
1
2
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Steps:
1) Attach upper extrusions to lower extrusions [2 to 1 and 4 to 3].
2) Attach (2) extrusions [5] between vertical assembly [1/2 and 3/4], placing insert
between horizontals as shown in illustration.
3) Assemble counter base by connecting panel
then continue in numerical order.
4) Velcro internal shelf supports to inside of assembled counter base.
5) Place internal shelf atop supports.
6) Attach remaining horizontal extrusions [5] between vertical assembly,
placing inserts where indicated.
7) Attach shelf supports [6] to vertical extrusion [2], then set shelves atop supports.
5
Insert Size:
9.529"w x 18.331"h
5a
Insert Size:
9.529"w x 23.331"h
6
6
5
#1 to connect on vertical extrusion [1],
Monitor Mount Attachment
Attach monitor brackets
to back of monitor.
Insert connectors into groove of
Hook monitor brackets over top of wall
extrusions. Then attach wall mount
plate, then secure with safety bolts to
to connectors using bolts provided.
bottom of monitor brackets.
Step 1
866.652.2100
Connector
Modul
Extrusion
© 2011