Basic Safety Instructions - Image Access WideTEK 12 Setup Manual

Basic safety instructions

Avoid injury or death from electric shock
➢ Never open the scanner case.
➢ Do not expose the scanner to dripping or splashing water, and do not
place containers filled with liquid on the scanner. Liquid ingress may
damage the scanner.
➢ Do not insert any objects into the scanner through any slots or
openings.
➢ Only connect the scanner to a properly installed and grounded power
outlet using the supplied power adapter.
➢ Do not use the power adapter if the housing or the cable of the power
adapter is damaged. In this case, replace the power adapter with a one
of the same type.
➢ Do not use the scanner if it is visibly damaged. In this case, unplug the
power cord from the wall outlet. Contact Image Access technical
support, see the Technical Support section beginning on page 7.
Avoid burns
➢ Do not cover the existing openings in the scanner housing. They are
used for ventilation. Otherwise, the scanner could overheat.
➢ Do not place the scanner in front of air conditioners that emit intense
heat.
Avoid cuts
The glass plate of the scanner is only suitable for the weight of documents.
Objects or body parts with higher weight may destroy the glass plate and
cause cuts.
➢ Make sure that the weight of the item to be scanned does not exceed
10 kg (22 lbs.)
Device safety
9