Emerson Rosemount 2051HT Quick Start Manual page 14

Quick Start Guide
Measurement type, Units, Scaling, and Low Flow Cutoff (when applicable)
can be set via either:
• LOI – see
• Class 2 master – see
3.4 Configuration tools
Local operator interface (LOI)
When ordered, the LOI can be used for commissioning the device. To
activate the LOI, push either configuration button located under the top tag
of the transmitter, or use the push buttons located on the LCD. See Table
Table 3-1
changes made using the LOI.
Table 3-1: LOI Button Operation
(1)
Button
(1) Reverse scroll also available (scroll + enter).
(2) Characters blink when they can be changed.
Figure 3-1: LOI Menu
3.5 Class 2 Master
The Rosemount 2051 Profibus DD and DTM files are available at
Emerson.com
steps to configure the transmitter for Pressure measurement. See the
Rosemount 2051
14
Table 3-1
Table 3-2
for operation and menu information. The security jumper prevents
Action
Scroll
Enter
or by contacting your local salesperson. See
Reference Manual
for parameter configuration
Navigation Character
Entry
Moves down Changes
menu character
categories value
Selects menu Enters
category character and
advances
for Level configuration instructions.
November 2019
Save?
Changes
between Save
(2)
and Cancel
Saves
Table 3-2 for
Emerson.com/Rosemount