Table of Contents
Advertisement
３−３ TROUBLESHOOTING
This section explains how to deal with trouble in the card recognition function, camera unit
(ASSY CCD CASE), and LED unit (ASSY LED L/R).
Refer to the Owner's Manual for details on how to replace each part.
The shutter speed is wrong despite automatic adjustment.
[CAUSE]:
[COUNTERMEASURES]:
[CAUSE]:
[COUNTERMEASURES]:
[CAUSE]:
[COUNTERMEASURES]:
[CAUSE]:
[CHECKING METHOD]:
[COUNTERMEASURES]:
[CAUSE]:
[COUNTERMEASURES]:
The yellow circle is not displayed during camera position adjustment.
[CAUSE]:
[COUNTERMEASURES]:
[CAUSE]:
[CHECKING METHOD]:
[COUNTERMEASURES]:
[CAUSE]:
[COUNTERMEASURES]:
[CAUSE]:
[COUNTERMEASURES]:
The test sheet is not laid out correctly.
Lay the test sheet correctly on the field.
Extraneous matter is trapped between the test sheet and the field
sheet.
Confirm that nothing is trapped between the test sheet and the
field sheet.
The test sheet has been moved during automatic adjustment.
Perform automatic adjustment again without moving the test
sheet.
Damage to the LED Unit
Remove the field glass for the components and watch the LED
indication.
Replace the ASSY LED L/R.
Damage to the Camera Board
Replace the ASSY CCD CASE.
The test sheet is not laid out correctly.
Lay the test sheet out correctly.
The camera is wildly off-center relative to the field.
Position the center of the test sheet just inside the field and see
whether the circle appears.
Turn the camera adjustment knobs to reduce the gap.
The mounting position of the lens on the camera board is out of
alignment.
Replace the ASSY CCD CASE.
The lens focus is out of alignment.
Replace the ASSY CCD CASE.
− 59 −
Advertisement
Table of Contents
