Table of Contents
Advertisement
Agilent system cabinet power strips are equipped with a thermal circuit
breaker for each power phase. If one phase shorts or overloads, one or
both of the circuit breakers in the power strip trip. Unplug the power strip
before trying to locate and correct the electrical problem, then reset both
circuit breakers on the power strip to restore power to the cabinet.
Maintenance
To prevent electrical shock, disconnect the instrument and/or system from
WA R N I N G
mains before cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
Safety symbols and instrument markings
Symbols and markings in manuals and on instruments alert you to
potential risks, provide information about conditions, and comply with
international regulations.
may find in a manual or on an instrument.
Table 15 Safety symbols and instrument markings
Safety symbols
E5505A Installation Guide
Service, Support, and Safety Information
Table 15
defines the symbols and markings you
Definition
Warning: risk of electric shock.
Warning: hot surface.
Caution: refer to instrument documentation.
Laser radiation symbol: marked on products that have a laser
output.
Alternating current.
Both direct and alternating current.
Direct Current.
Three-phase alternating current.
Earth (ground) terminal.
Protective earth (ground) terminal.
A
89
Advertisement
Table of Contents
