4
Measurement Software
4
E5500_server_hard_conn
05 Apr 04 rev 1
Figure 15 Select test set, FFT analyzer, and swept analyzer
5
Selecting the three instruments ties those assets to the confidence test performed in the
N O T E
next step.
6
38
In the Asset Manager, verify that the test set and PC Digitizer are
d
configured correctly (check that the license key has been entered
correctly). Also do the following:
•
Check your system hardware connections.
•
Click the green check- mark button on the Asset Manager's toolbar to
verify connectivity.
•
Return to Server Hardware Connections and click the Check I/O
button to re- check it.
From the FFT Analyzer pull- down list, select NI PCI6111- 1 (see
Figure
15). Click the Check I/O button. A green check- mark confirms a
successful I/O check. If the I/O check is not successful, follow the same
process as in
step
3d to verify instrument configuration and connection.
From the Swept Analyzer pull down list select E4411A. Click the
Check I/O button. A green check- mark confirms a successful I/O check.
If the I/O check is not successful, follow the same process as in
to verify instrument configuration and connection.
Close the Server Hardware Connections box.
step
3d
E5505A Installation Guide