Silicon Graphics SGI 1200 Quick Start Manual page 9

Getting Manuals
11. At power on the system displays a CPU description, runs a memory test, displays
several additional screen messages, and then prompts you with the following:
Press <F2> to enter Setup
12. If you do not immediately press
appears:
Press <Ctrl><A> for SCSI Utility
• If you press
Ctrl+A
changes, press Esc to exit the utility. Note that if there are no SCSI devices
connected to the system you cannot enter the SCSI Utility.
• If you do not press
another chance to
power-on self tests (POST). If the OS is not available you see the message:
Operating System not found
13. While the POST runs, you can press
can choose a new boot device or enter BIOS Setup.
After POST completes, the OS loads, then the login screen appears.
SGI provides manuals online and on CDs in various formats.
The SGI Technical Publications Library
If you would like to access manuals on the SGI 1200 server using the World Wide Web,
SGI makes its manuals available in a variety of formats via the Web. Using your Web
browser, open the following URL:
http://techpubs.sgi.com/library
Enter a keyword search, or search by title to find the information or manual you need.
, the boot process continues. Then this message
F2
you enter the SCSI Utility screen. After you make any
the system continues the boot process, offers you
Ctrl+A
Press <F2> to enter Setup
to access a boot menu. From this menu, you
Esc
Getting Manuals
and then proceeds to the
5