Fixture Installation - ADJ HYDRO WASH X19 User Manual

FLAMMABLE MATERIAL WARNING
Keep fixture at least 0.7 feet (0.2m) away from any flammable materials, decora-
tions, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installa-
tions.
MINIMIM ALLOWABLE DISTANCE TO OBJECTS/SURFACES IS 1.6 FEET (0.5
METERS)
EXTERNAL SURFACE MAY REACH TEMPERATURES OF UP TO 167°F (75°C)
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical and con-
struction codes and regulations. Before rigging/mounting the fixture to any metal truss/structure or
placing the fixture on any surface, a professional equipment installer MUST be consulted to deter-
mine if the metal truss/structure or surface is properly certified to safely hold the combined weight
of the fixture, clamps, cables, and accessories. Overhead fixture installation must always be secured
with a secondary safety attachment, such as an appropriately rated safety cable that meets all local,
national, and country codes and regulations.
Fixture maximum ambient operating temperature is 104°F. (40°C). Do not use this fixture outside this
temperature range.
Fixture should be installed in areas outside walking paths, seating areas, or areas wHere unauthor-
ized personnel might reach the fixture by hand.

FIXTURE INSTALLATION

13